Conmoly | CM-DATA-DVI | DVI Digital Video Cables
Shenzhen Xinju New Materials Technology Co., Ltd.
https://conmoly.com

Selection reference; third-party published figures are not Conmoly guaranteed specifications or certifications. Final specifications require configuration review. Images illustrate product form.
Reference configuration: 24 AWG single-link digital-video interconnect for aerospace and defense displays, controlling its 100-ohm differential channel, insertion loss, pair-to-pair skew and intra-pair skew from −65 to +200 °C in demanding EMI environments.

Values apply to the 24 AWG single-link digital-video construction.
Standard impedance: 100 ± 10 Ω | Differential channel
Typical operating voltage: < 15 V | Digital-video system
Velocity / delay: 80% · 4.07 ns/m | Nominal values
Capacitance: 40.0 pF/m | Nominal value
Pair-to-pair / intra-pair skew: 52.50 / 13.12 ps/m | Maximum values
Dielectric withstand: 1500 / 1000 Vrms | Conductor-conductor / conductor-shield
Temperature range: −65 to +200 °C | Engineered-fluoropolymer jacket
Source: https://www.gore.com/products/dvi-cables-aerospace-defense-air-land

Single-link DVI cable: Carries the digital-video channel in a 24 AWG high-speed construction with controlled pair-to-pair and intra-pair skew.
Circular-connector assembly: Integrates video pairs, auxiliary conductors and shield continuity into airborne circular-connector termination.
Display-system harness: Defined around resolution, channel length, routing and platform EMI conditions.
Silver-plated copper-alloy conductors: Gauge, voltage drop, strength and termination contacts define the conductor construction.
Low-loss insulation: Expanded PTFE/PTFE controls impedance, delay and high-frequency attenuation.
Controlled signal units: Differential pairs, quads or multichannel video/data units are formed around the protocol.
Individual and overall shields: Pair coupling, external EMI and connector return continuity are managed together.
Environmental jacket: Wide temperature, abrasion, flame, marking and harness termination are balanced.
Protocol and speed: Interface revision, target rate, encoding and maximum channel length
Electrical boundary: Impedance, insertion/return loss, skew and dielectric withstand
Channel construction: Pair count, auxiliary wires, power and shield zoning
Installation envelope: Gauge, diameter, mass, bend radius and harness section
Environment: Temperature, vibration, abrasion, fluids, smoke/toxicity and flame
Termination: Connector, contact, backshell, grounding and strain relief
CM-DVI-SL-24 | Single-link DVI | 24 AWG high-speed pairs plus auxiliary wires and composite shield | 100 ± 10 Ω · pair-to-pair skew ≤ 52.50 ps/m | Cockpit displays, mission workstations and digital mapping
CM-DVI-CIRC | Circular-interface DVI assembly | Controlled-impedance cable with airborne circular termination | −65 to +200 °C · < 15 V | Airborne equipment, vehicle displays and serviceable harnesses
CM-DVI-HARNESS | Custom digital-display channel | Defined by length, shield grounding and equipment interfaces | Intra-pair skew ≤ 13.12 ps/m · channel validation | Custom displays, image processing and high-EMI platforms
Solution codes support early interface, length and installation matching. Final part number, conductor definition, connector pinout, shield termination and complete-channel performance are confirmed in the drawing and technical specification.
Impedance, insertion/return loss, crosstalk and skew
Continuity, wire map, dielectric withstand and insulation resistance
Temperature, vibration, abrasion, flex and termination retention
Full-channel test at target protocol, length and connector configuration
Cockpit and vehicle displays
Mission systems and workstations
Flight management and weather mapping
In-flight entertainment
Aerospace circular or rectangular connectors
High-density contacts and backshells
Pigtail, fixed-length harness or complete assembly
Data rate and channel capability depend on the final cable, length, connectors and termination process and must be confirmed as a complete channel.