Conmoly | CM-RF-GENERAL | General-Purpose Microwave RF Assemblies
Shenzhen Xinju New Materials Technology Co., Ltd.
https://conmoly.com

Selection reference; third-party published figures are not Conmoly guaranteed specifications or certifications. Final specifications require configuration review. Images illustrate product form.
Reference configuration: Flexible low-loss RF interconnect direction for internal equipment, module-to-module, bench and environmental-test links, balancing compact routing, shielding and long-term amplitude/phase stability.

Frequency, connector and standard length are combined by assembly family; final insertion loss and VSWR must be based on the selected assembly part number.
Maximum operating frequency: 70 GHz | General-purpose microwave/RF assembly family
Minimum bend radius: 2.54 mm (0.10 in) | Applicable assembly configuration
Frequency families: 18 · 26.5 · 32 · 40 · 50 · 65 · 67 · 70 GHz | Selected by assembly category
Standard lengths: 0.30 · 0.61 · 0.91 · 1.22 · 1.52 m | Catalog standard configurations
Phase / time-delay matching: Through 70 GHz | Sub-picosecond tolerances available
Connector options: SMA · SMP · TNC-A · 2.92 mm | Configured by frequency and interface
Source: https://www.gore.com/products/microwave-rf-assemblies-general-purpose

Internal equipment interconnect: For board, module and enclosure paths with tight routing.
General test connection: For repeat measurements on benches, load boards and automated test equipment.
Environmental-test connection: For chamber, thermal-vacuum or remote-instrument paths where temperature and length change are evaluated.
Center conductor: Size and finish selected for frequency, flex and termination.
Low-loss dielectric: Establishes target impedance and controls dielectric loss.
Outer conductor: Provides return path, shielding and mechanical stability.
Protective jacket: Matches bend, abrasion, temperature and chemical environment.
Precision connector: Optimized with transition, strain relief and assembly process.
Frequency range: Minimum/maximum frequency and critical test points
Length: Assembly length, tolerance and routing
Loss budget: Allowable insertion loss, return loss and shielding target
Stability: Amplitude/phase behavior with bend, temperature and time
Mechanical: Bend radius, motion, abrasion and strain relief
Connector: Series, gender, orientation and mounting

S-parameters and shielding effectiveness
Amplitude/phase comparison with bend and temperature
Connector repeat mating and torque
Length, appearance, continuity and mechanical retention
5G and communication equipment test
Antenna arrays and clock distribution
ATE, load boards and evaluation boards
Module, enclosure and board interconnects
Common precision coax connector directions
Straight, right-angle and panel-mount
Fixed-length or matched RF assemblies
Frequency, loss and stability values are supplied only after cable type, length, connector and test conditions are defined.