Conmoly | CM-FLEX-FLAT | High-Flex Flat Cables
Shenzhen Xinju New Materials Technology Co., Ltd.
https://conmoly.com

Selection reference; third-party published figures are not Conmoly guaranteed specifications or certifications. Final specifications require configuration review. Images illustrate product form.
Reference configuration: Parallel low-profile constructions for repeated planar motion, combining compact routing with conductor-position control, low internal stress and equipment-specific termination.

Dynamic life is based on a 50 mm bend radius and up to 4 g; IDC and antistatic versions have their own electrical and environmental values.
Maximum acceleration / speed: 4.0 g · 4.0 m/s | Dynamic application
Maximum self-supporting stroke: 500 mm | Standard and antistatic configurations
Maximum width: 300 mm | Custom flat construction
Minimum bend radius: 50 mm | Dynamic flexing
Dynamic flex life: > 20 million cycles | BR 50 mm, up to 4 g
Operating temperature: −40 to +200 °C | Standard version
Cleanroom / particulation: ISO Class 1 · < 0.1% | Cleanroom application configuration
Surface resistance / charge decay: ≤ 2 × 10⁹ Ω · ≤ 4 ms | Antistatic version
Source: https://www.gore.com/products/high-flex-flat-cables-semiconductor-industrial-automation

Standard clean direction: For clean automated equipment and controlled horizontal or vertical motion.
Antistatic direction: For ESD-sensitive handling, inspection and packaging equipment.
IDC-compatible direction: Pitch and conductor layout defined around insulation-displacement termination where appropriate.
Fine-stranded conductors: Stranding balances electrical resistance and fatigue behavior.
Flexible insulation: Low-stress material protects conductors while maintaining pitch.
Parallel layout: Places conductors near the neutral plane and controls relative movement.
Reinforcement/slip layer: Stabilizes width and manages tension, friction and local stress.
Low-friction surface: Supports repeated travel and selected clean-environment direction.
Circuit content: Signal, power, grounding and optional optical/pneumatic elements
Cable geometry: Width, thickness, pitch and conductor count
Motion profile: Stroke, speed, acceleration, radius and cycles
Orientation: Horizontal, vertical and guided/free-span routing
Environment: Cleanliness, ESD, temperature, humidity and vacuum
Termination: IDC, solder, crimp or custom connector assembly

Full-stroke dynamic flex cycling
Electrical comparison before and after cycling
Surface wear, particle and ESD direction tests
Clamp, transition and connector retention
Wafer and display handling
Linear stages and inspection equipment
Pick-and-place and packaging
Cleanroom automation
IDC and fine-pitch connector directions
Equipment-specific end terminations
Flat-to-round transition assemblies
Flex life and clean performance are functions of radius, stroke, acceleration, load, installation and material configuration and must be validated on the target equipment.