Conmoly | CM-FLEX-HYBRID | Hybrid Round Cables
Shenzhen Xinju New Materials Technology Co., Ltd.
https://conmoly.com

Selection reference; third-party published figures are not Conmoly guaranteed specifications or certifications. Final specifications require configuration review. Images illustrate product form.
Reference configuration: Signal, power, coax, fiber, pneumatic or fluid units combined inside one round jacket to simplify routing on multi-axis motion platforms and harsh equipment.

Hybrid round cables are configured to order; voltage and temperature apply to the example construction shown and do not represent every combination.
Velocity of propagation: > 85% | High-speed signal configuration
Potential weight saving: Up to 70% | Compared with traditional jacketed cabling
Insulation wall: 0.004 in | MIL-ENE insulation; replaces typical 0.010–0.020 in
Operating voltage: 600 Vrms | Example construction
Operating temperature: −30 to +120 °C | Example construction
Flexibility improvement: 94% more flexible | Comparison case with 50% smaller diameter
Integrated functions: Signal · Coax · Fiber · Power · Fluid | Combined to system requirements
Source: https://www.gore.com/products/hybrid-round-cables-harsh-environment

Data plus power: High-speed data, control and power combined while thermal, electromagnetic and mechanical separation are managed.
Coax/fiber plus control: Sensitive communication units integrated with lower-speed control to reduce separate cable count.
Electrical plus pneumatic/fluid: Electrical cores and tubing co-designed for end effectors or test equipment.
Functional units: Wires, pairs, coax, fiber, power and tubing are specified separately.
Unit isolation: Shields, tapes and placement reduce thermal and electromagnetic coupling.
Fillers and anti-twist: Maintain roundness and manage relative movement in multi-axis flex.
Overall shield: Configured for system EMI/RFI and grounding strategy.
Dynamic jacket: Provides flex, abrasion, fluid and temperature protection.
Function mix: Parameters for every signal, power, optical, pneumatic or fluid element
Motion: Flex, torsion, combined multi-axis motion and target cycles
Envelope: Maximum diameter, mass, bend radius and free length
EMC: Unit shields, overall shield and grounding
Environment: Temperature, abrasion, pressure, fluids and chemicals
Branches/interfaces: Connectors, fittings, breakout locations and service method

Crosstalk and isolation among hybrid units
Multi-axis flex/torsion cycling
Tubing pressure, leakage or fluid compatibility
Whole-cable tensile, abrasion, thermal and termination retention
Robot end effectors
Test equipment and complex motion platforms
Industrial lighting and automation
Dense mechatronic equipment
Hybrid circular connectors
Electrical connectors and tube fittings
Breakout harnesses and custom assemblies
Each functional unit and the complete cable must be verified together for motion, heat dissipation and electromagnetic compatibility.