Conmoly | CM-POWER-MAGNET | High-Temperature Magnet Wire
Shenzhen Xinju New Materials Technology Co., Ltd.
https://conmoly.com

Selection reference; third-party published figures are not Conmoly guaranteed specifications or certifications. Final specifications require configuration review. Images illustrate product form.
Reference configuration: Engineered fluoropolymer insulation protects copper windings and maintains insulation resistance and breakdown performance in high temperature, high pressure, oil and hydrolysis environments.

Breakdown-voltage testing is based on the AWG 2801 construction; other conductor sizes and winding processes require validation.
Operating voltage range: 300–600 V AC | Magnet-wire product range
Spark-test voltage: 1500 V AC | Test value
Dielectric breakdown: 4.4 kV | ANSI/NEMA MW 1000; AWG 2801
Operating temperature: −55 to +260 °C | Operating range
Insulation material: Engineered fluoropolymer | Chemical and hydrolysis resistance
Conductor: Bare copper | Standard construction
Source: https://www.gore.com/products/magnet-wire-downhole-oil-gas-motors

High-temperature motor winding: For motors with constrained cooling and elevated voltage stress.
Downhole motor: For combined oil, water, pressure and temperature exposure.
Transformer and inductor: Conductor and insulation defined around winding radius, fill and hipot.
High-conductivity conductor: Gauge, stranding and plating are selected for resistance, flex and termination.
Primary insulation: Thin-wall high-temperature material establishes voltage, PD and abrasion margin.
Field or shield layer: Grading, shielding and return paths are added for high-voltage or EMI needs.
Mechanical protection: Tapes, braid or jacket improve cut-through, wear and installation durability.
Termination and strain relief: Crimp, solder, connector and thermal-cycle interfaces are controlled together.
Voltage and current: Continuous/peak voltage, current, frequency and partial-discharge boundary
Gauge and drop: Length, conductor section, resistance and allowable voltage drop
Thermal environment: Ambient, bundling, cooling and temperature rise
Installation: Diameter, mass, bend radius, vibration and abrasion
Material environment: Fluids, humidity, flame, smoke/toxicity or vacuum
Termination: Terminal, crimp window, connector and strain relief

Conductor resistance, voltage drop, hipot and insulation resistance
Partial discharge, breakdown and high-temperature electrical stability
Abrasion, cut-through, flex, tensile and vibration
Load temperature rise and post-cycle termination inspection
Oil and gas downhole motors
High-temperature industrial motors
Transformer and inductor windings
Coolant or moisture-exposed equipment
Pigtail, terminal or crimp-contact delivery
Single-, two- or multicore feeder construction
Shielded or unshielded complete assembly
Ampacity, voltage and temperature rise must be defined with gauge, length, altitude, bundling, cooling and termination conditions.