Conmoly | CM-POWER-FEEDER | High-Voltage Power Feeder Cables
Shenzhen Xinju New Materials Technology Co., Ltd.
https://conmoly.com

Selection reference; third-party published figures are not Conmoly guaranteed specifications or certifications. Final specifications require configuration review. Images illustrate product form.
Reference configuration: High-voltage, wide-temperature, low-springback feeder paths for aircraft main power and electrification systems, controlling partial discharge, thermal aging, abrasion and constrained routing.

Altitude, voltage and temperature values apply to their stated combinations and are not interchangeable as continuous ratings for arbitrary conditions.
Voltage rating: 1000 Vrms | 260 °C at 25 kft (7.6 km)
Voltage rating: 1850 Vrms | 260 °C at sea level
AC breakdown voltage: > 15 kV | Test value
Insulation resistance: > 1 TΩ | At 23 °C
Temperature / bend radius: −65 to +260 °C · 3×OD | Mechanical/environmental range
Thermal endurance: 30,000 h @ 260 °C | Endurance condition
Cut-through / abrasion: > 800 N · > 1,000,000 cycles | Mechanical tests
Source: https://www.gore.com/products/power-feeder-cables-aerospace-defense

High-voltage single feeder: For primary power distribution and high-current equipment.
Shielded feeder assembly: Controls EMI and return path alongside high-voltage delivery.
Platform-specific feeder: Gauge, length, terminals and routing form a complete assembly.
High-conductivity conductor: Gauge, stranding and plating are selected for resistance, flex and termination.
Primary insulation: Thin-wall high-temperature material establishes voltage, PD and abrasion margin.
Field or shield layer: Grading, shielding and return paths are added for high-voltage or EMI needs.
Mechanical protection: Tapes, braid or jacket improve cut-through, wear and installation durability.
Termination and strain relief: Crimp, solder, connector and thermal-cycle interfaces are controlled together.
Voltage and current: Continuous/peak voltage, current, frequency and partial-discharge boundary
Gauge and drop: Length, conductor section, resistance and allowable voltage drop
Thermal environment: Ambient, bundling, cooling and temperature rise
Installation: Diameter, mass, bend radius, vibration and abrasion
Material environment: Fluids, humidity, flame, smoke/toxicity or vacuum
Termination: Terminal, crimp window, connector and strain relief

Conductor resistance, voltage drop, hipot and insulation resistance
Partial discharge, breakdown and high-temperature electrical stability
Abrasion, cut-through, flex, tensile and vibration
Load temperature rise and post-cycle termination inspection
Rotorcraft and future vertical lift
eVTOL electrification
High-voltage airborne distribution
High-power equipment and actuators
Pigtail, terminal or crimp-contact delivery
Single-, two- or multicore feeder construction
Shielded or unshielded complete assembly
Ampacity, voltage and temperature rise must be defined with gauge, length, altitude, bundling, cooling and termination conditions.