Conmoly | CM-RF-RUGGED-TEST | Ruggedized RF Test Assemblies
Shenzhen Xinju New Materials Technology Co., Ltd.
https://conmoly.com

Selection reference; third-party published figures are not Conmoly guaranteed specifications or certifications. Final specifications require configuration review. Images illustrate product form.
Reference configuration: Cable, connector and strain-relief systems reinforced for frequent flexing, mating, twisting and accidental mechanical loads in laboratories, production lines and field testing.

The 110 GHz limit applies to Type CX; continuous flex life applies only to the specified constructions.
Guaranteed frequency limit: 110 GHz | Type CX test assembly
Continuous flex life: > 100,000 cycles | Applicable constructions
Frequency families: 18 · 26.5 · 32 · 40 · 50 · 70 · 110 GHz | Type CX supports 110 GHz
Standard lengths: 0.30–1.52 m | Families through 70 GHz
Type CX lengths: 10 · 13 · 16 · 20 · 24 · 30 cm | 110 GHz family
Phase / time-delay matching: Through 70 GHz | Sub-picosecond tolerances available
Source: https://www.gore.com/products/ruggedized-test-microwave-rf-assemblies

Laboratory test assembly: For bench instruments and R&D measurement, emphasizing handling flexibility and repeatability.
Automated production assembly: For frequent movement and mating, emphasizing service life, connector protection and downtime.
Field/environmental assembly: Reinforced toward dust, moisture, abrasion and wide-temperature strain relief.
Stable coax core: Controls impedance, loss and phase change after bending.
Crush reinforcement: Distributes stepping, pinching and localized bend loads.
Anti-kink structure: Reduces damage caused by twist, knots and over-bending.
Abrasion jacket: Supports benches, equipment edges and field use.
Rugged connector: Improves tensile, repeated-mating and strain-relief performance.
Test frequency: Target band and measurement dynamic range
Stability: Allowable amplitude/phase variation with bend and temperature
Duty: Flex frequency, mate cycles and handling pattern
Length/routing: Assembly length, drag path and minimum bend radius
Environment: Temperature, dust, humidity, chemicals and vacuum
Connector: Interface, adapters, torque and protection

Initial S-parameter and repeatability baseline
Repeated flex, twist, crush and kink-direction tests
Amplitude/phase stability with temperature
Connector mating, tensile and torque retention
Millimeter-wave and 5G testing
Anechoic, antenna and EMC testing
RF production test and ATE
Environmental chambers, thermal vacuum and field test
Precision coaxial connector directions
Standard or low-profile strain relief
Adapters and matched test accessories
Ruggedization does not permit unlimited bending or crushing; service life must be validated against frequency, radius, load and handling practice.