Conmoly | CM-SPECIAL-TETHER | Tethered Drone Hybrid Cables
Shenzhen Xinju New Materials Technology Co., Ltd.
https://conmoly.com

Selection reference; third-party published figures are not Conmoly guaranteed specifications or certifications. Final specifications require configuration review. Images illustrate product form.
Reference configuration: High-voltage power, data pairs and single-mode fiber are integrated into a low-mass, weatherproof, crush-resistant tether for continuous drone power and secure high-bandwidth communication.

Power pair, data pair and fiber are separate functional units; optical attenuation may increase above 85 °C.
Operating voltage: 250 / 600 Vrms | Power pair / data pair
Test voltage: 1500 Vrms | Power and data pairs
Maximum optical loss: 0.35 dB/km @ 1310 nm | Single-mode fiber
Maximum optical loss: 0.20 dB/km @ 1550 nm | Single-mode fiber
Insulation wall: 0.14 mm | Power and data pairs
Diameter reduction: 20% smaller | Versus nylon tether cables
Power gauges: 16 · 20 · 24 AWG | Standard part-number direction
Source: https://www.gore.com/products/tethered-drone-cables-commercial-defense

Power + fiber: Continuous power with EMI-immune optical communication.
Power + data + fiber: Control, high-speed data and video return in one tether.
Multiple power gauges: 16/20/24 AWG power pairs selected by altitude and load.
Functional units: Power, data, fiber, video and discrete units are separated by function.
Unit isolation: Twists, coax, individual shields and spacing manage coupling.
Strength or overall shield: Tensile load, return path and platform grounding determine the structure.
Sealed rugged cover: Resists fluids, abrasion, temperature, repeated deployment and mission loads.
Mission termination: Connectors, branches, marking, strain relief and rapid-service interfaces are integrated.
Interface document: Pinout, protocols, connector and standard revision
Power and signal: Voltage, current, bandwidth, optical path and shield zoning
Mechanical boundary: Length, diameter, mass, tensile load and bend radius
Mission environment: Temperature, fluids, abrasion, vibration, shock and sealing
Operation: Reel, release, mating, maintenance and storage cycles
Acceptance matrix: Electrical, mechanical, environmental and system tests

Pin-by-pin continuity, insulation, hipot and wire map
High-speed, fiber or RF unit performance
Tensile, flex, abrasion, sealing and termination retention
Interface-standard environment and system integration
EO/IR sensor platforms
HD camera and video return
ISR and search/rescue
Temporary communications and aerial cell sites
Hybrid power, data and fiber construction
Mission connector, branch and strain relief
Fixed-length complete and serialized assembly
Standard and product names identify the target interface only and do not imply unverified compliance, qualification or platform approval.