conmoly 鑫聚新材
中文Contact us

CONMOLY

Engineering backed by measurement.

Time-domain, RF, network cabling and environmental testing for communication cables and assemblies.

TEST EQUIPMENT

From signal analysis to environmental validation.

Available test equipment includes Tektronix oscilloscopes and time-domain analysis modules, Keysight and Ceyear vector network analyzers, Fluke Networks cable certification analyzers, and environmental test equipment. Together, they support time-domain analysis, frequency-domain measurement, network cabling verification and environmental performance evaluation for communication cables and assemblies.

We apply these capabilities to engineering development, product selection, prototype validation and delivery inspection, helping turn application requirements into measurable acceptance criteria.

Selected test equipment

Tektronix

DSA8300

Digital sampling oscilloscope

Waveform and time-domain analysis

Model reference

Keysight

E5071C

4-port ENA vector network analyzer

Transmission and reflection measurement

Model reference

Ceyear

AV3672

2-port vector network analyzer

RF and microwave network measurement

Model reference

Fluke Networks

DSX-8000

Cable certification analyzer

Network cabling performance verification

Model reference

Equipment model references describe instrument families. Installed options, calibration status and the measurement scope must be confirmed for the selected project.

01

Time-domain analysis

Tektronix oscilloscopes with time-domain analysis modules

Evaluate waveforms and, with the applicable measurement setup, impedance continuity and reflections along the signal path. These measurements help identify discontinuities in cables, connectors and terminations.

02

RF & frequency-domain measurement

Keysight & Ceyear vector network analyzers

Measure transmission and reflection characteristics, including insertion loss, return loss, VSWR and phase, to evaluate cable and assembly performance across the agreed frequency range.

03

Network cabling verification

Fluke Networks cable certification analyzers

Check wiremap, length, insertion loss, return loss and near-end crosstalk for applicable network cabling configurations. Select test limits to match the link type and project requirements.

04

Environmental performance validation

Environmental test equipment

Combine electrical measurements with agreed environmental tests to assess performance under the specified conditions and compare results before and after exposure. Track changes in loss, reflection and other project-critical parameters.

A test plan built around your application

The test plan defines the sample configuration, measurement method, interfaces, environmental conditions and acceptance limits. Measurement data, characteristic curves and supporting records can be agreed as part of the project deliverables.

Test coverage, frequency range and environmental conditions are defined for the selected product and equipment configuration. Share your operating conditions and required standards so we can confirm the appropriate validation plan.

Discuss Your Test Requirements

TEST RECORDS

IEEE 1394b cable · Signal integrity

Signal integrity · archived test example

The A1 manual records a 50 ft cable tested at 500 Mbps with a 1.1 Vpp input and a 2²⁷−1 PRBS pattern. The bend setup used a 12.7 mm mandrel diameter and 20 repeated wraps. These are test conditions, not the minimum installation bend radius.

Static condition eye diagram
Static condition
After bending eye diagram
After bending

Archived figures from manual A1, PDF page 23. The excerpt does not identify a specific part number. Current model acceptance requires the agreed test plan and traceable sample records.

Explore the cable series

Engineering the complete connection

01

Electrical performance

Frequency range, impedance, attenuation, shielding and phase requirements.

02

Mechanical design

Cable routing, minimum bend radius, interface geometry and weight.

03

Material selection

Dielectric, conductor, shield and jacket choices based on the operating environment.

04

Validation planning

An agreed test method, acceptance criteria and records for the selected configuration.