Product construction
Illustrated model: CM-COAX-PREC-OD1P47

| Callout | Layer | Material / description |
|---|---|---|
| A | Centre conductor | Stranded silver-plated copper |
| B | Dielectric | FEP |
| C | Shield | Silver-plated flat copper wire braid |
| D | Jacket | Black silicone rubber |

CONMOLY
Miniature and low-delay coaxial constructions for compact RF connections, selected by dielectric, dimensions and the required cable configuration.

CONMOLY
CM-COAX-PREC
Precision coaxial options address compact RF layouts through miniature and low-delay constructions. Models use ePTFE/FEP, FEP or low-density PTFE insulation with different shielding arrangements. Check channel layout, length, termination clearance and impedance against the individual model data.
Application directions for selection. Confirm suitability and any required qualification for the specific configuration and project.
| Nominal impedance | 50 Ω; OD1P70: 51 Ω |
|---|---|
| Low-delay constructions | 4.3 ns/m (OD1P40 / OD1P80 / OD2P05) |
MODELS & DIMENSIONS
| Model | Conductor (AWG) | Overall diameter (mm) | Mass (g/m) | Dielectric |
|---|---|---|---|---|
| CM-COAX-PREC-OD0P99 | 33 (1/0.22 mm) | 0.99 | 2.1 | ePTFE/FEP |
| CM-COAX-PREC-OD1P42 | 28 (1/0.32 mm) | 1.42 | 5.9 | ePTFE/FEP |
| CM-COAX-PREC-OD1P47 | 32 (7/42) | 1.47 | 3.8 | FEP |
| CM-COAX-PREC-OD1P50 | 28 (1/0.32 mm) | 1.50 | 6.3 | LD-PTFE |
| CM-COAX-PREC-OD1P70 | 26 (1/0.404 mm) | 1.70 | 8.9 | LD-PTFE |
| CONMOLY model | Centre conductor (mm) | Overall diameter (mm) | Mass (g/m) |
|---|---|---|---|
| CM-COAX-PREC-LD-OD1P40 | 0.32 | 1.40 | 5.4 |
| CM-COAX-PREC-LD-OD1P80 | 0.40 | 1.80 | 8.7 |
| CM-COAX-PREC-LD-OD2P05 | 0.51 | 2.05 | 10.3 |
Dimensions and material options are subject to the order specification; a dash means not listed.
| Dielectric | ePTFE/FEP, FEP or low-density PTFE, depending on construction. |
|---|---|
| Shielding | Silver-plated copper tape and/or braid, depending on model. |
CONSTRUCTION & LAYERS
Illustrated model: CM-COAX-PREC-OD1P47

| Callout | Layer | Material / description |
|---|---|---|
| A | Centre conductor | Stranded silver-plated copper |
| B | Dielectric | FEP |
| C | Shield | Silver-plated flat copper wire braid |
| D | Jacket | Black silicone rubber |
Product illustrationMicrowave RF & Coaxial
CM-COAX-SFSemi-flexible coaxial constructions with model-specific insulation and jackets, selected around a defined route, installation space and terminations.
Product illustrationMicrowave RF & Coaxial
CM-COAX-PS-SR50 Ω semi-rigid phase-stable coaxial constructions using a copper-alloy outer conductor and low-density PTFE insulation, in several sizes.
Product illustrationMicrowave RF & Coaxial
CM-COAX-PS-LWLightweight RF cable constructions using silver-plated copper-clad aluminium conductors and ePTFE / LD-PTFE insulation, in several sizes.