conmoly 鑫聚新材
中文Request a Quote

CONMOLY / ENGINEERING & CONNECTIVITY

Flexible Phase-Stable Coaxial Cables

50-ohm microwave cables for phase-sensitive equipment, antenna feeds and test interconnects. Select the diameter and frequency range against the loss budget and installation path.

Flexible Phase-Stable Coaxial Cables
Series photograph · Construction varies by model

Microwave RF & Coaxial

Part of our coaxial cable range · View series overview

CM-COAX-PS-F

Flexible Phase-Stable Coaxial Cables

Available for project supply. Select a model below and confirm the order specification.

  • 50 Ω
  • 1.46–8.10 mm diameter
  • −55 to +125 °C

Catalogue specifications

Catalogue data for available cable configurations. Final tolerances and acceptance requirements are agreed for the selected model.

Typical attenuation at +25 °C and sea level. A dash means no value is listed. Phase stability and assembly performance are agreed for the selected length, connectors, bend and temperature conditions.

Scroll the table horizontally to view all configuration conditions.

ParameterCatalogue valueConfiguration / condition
Impedance50 ΩAll listed models
Operating temperature−55 to +125 °CFinished cable
Cutoff frequency18 / 40 GHzSee individual model; not an assembly rating

Cable Product Manual · A1 · PDF pages 4, 5

MODEL SELECTION

Find your cable configuration

Scroll each table to compare all columns. Select a CM code to enquire about that model. A dash means no value is listed.

Flexible constructions

CodeCentre conductor (mm)Outer conductor (mm)Overall diameter (mm)Min. bend radius (mm)Mass (g/m)Capacitance (pF/m)Cutoff frequency (GHz)
CM-COAX-PS-F-OD1P460.321.251.466.478840
CM-COAX-PS-F-OD2P200.511.982.212.7148540
CM-COAX-PS-F-OD3P600.913.053.625.4328040
CM-COAX-PS-F-OD4P821.374.354.8225.4538018
CM-COAX-PS-F-OD5P501.75.15.525.4717818
CM-COAX-PS-F-OD7P362.156.57.3638.11157818
CM-COAX-PS-F-OD8P102.47.18.138.11457818

Flexible constructions · typical attenuation (dB/m)

Frequency (GHz)CM-COAX-PS-F-OD1P46CM-COAX-PS-F-OD2P20CM-COAX-PS-F-OD3P60CM-COAX-PS-F-OD4P82CM-COAX-PS-F-OD5P50CM-COAX-PS-F-OD7P36CM-COAX-PS-F-OD8P10
21.590.90.520.340.270.210.21
42.271.250.750.490.40.310.3
62.821.550.930.60.50.380.36
83.311.81.050.70.60.440.42
103.7521.150.780.670.50.48
124.172.251.280.860.720.550.53
144.532.41.40.930.810.610.57
185.152.71.551.060.90.680.65
26.56.353.31.95
407.942.4
  • Typical attenuation at +25 °C and sea level. A dash means no value is listed.
  • Phase stability and assembly performance are agreed for the selected length, connectors, bend and temperature conditions.

Cable Product Manual · A1 · PDF pages 4, 5

Available configurations

Flexible constructionsCM-COAX-PS-F-OD1P46 · CM-COAX-PS-F-OD2P20 · CM-COAX-PS-F-OD3P60 · CM-COAX-PS-F-OD4P82 · CM-COAX-PS-F-OD5P50 · CM-COAX-PS-F-OD7P36 · CM-COAX-PS-F-OD8P10

Cable construction

Centre conductorSolid silver-plated centre conductor.
DielectricLow-density PTFE insulation.
Outer conductor and shieldSilver-plated flat conductor and braided shield.
JacketFluoroplastic jacket.

Selection checklist

Signal and frequencyProtocol, frequency band, impedance and loss budget.
InstallationLength, routing, bend radius, motion and available space.
EnvironmentOperating temperature and required environmental tests.
TerminationConnector, pinout, shielding and strain relief.

Applications

  • Antenna and equipment interconnects
  • RF and microwave test systems
  • Airborne equipment routing

Interfaces & termination

  • Cable supply or project-specific termination
  • Confirm connector and cable compatibility before assembly

Project validation checklist

  • Impedance and attenuation at agreed frequency points
  • Continuity, insulation resistance and dielectric withstand as specified
  • Application-specific bend, temperature and assembly verification

Catalogue values support selection. Final tolerances, assembly performance and acceptance tests are defined in the approved drawing and specification. No certification is implied.

Coaxial Cable Series Overview
CM-COAX

Coaxial Cable Series Overview

Coaxial cables for RF, microwave, video and precision measurement, with selected configurations supporting frequencies up to 67 GHz. The operating range depends on the cable model, length and connector configuration.

Series capability · Up to 67 GHzReference · 50 / 75 Ω
View specifications